TESDA Machining Course, Skilled Workers Need This


Accidents happen anytime and anywhere. What’s worse is when it happened during the busiest hours of our lives. Moreover, we needed some tools or equipment in order to make our works easier and an example of these tools are some of the helpful machines regardless of what kind. What would happen if our machines got broken? Our deals would lessen and our living would’ve been hassled. In order to avoid such phenomenon, we should know the proper maintenance of our machines and in order to know that, of course we must learn it by studying it.

Check out one of the most in demand short courses offered in TESDA, Machining NC II. It is offered in the Philippines and guess what? It trains you in setting up and operating variety of machine tools in performing precision machining operations. If you think that would be all, think again! You may learn other competencies and the requirements as you continue on reading.

Aside from those mentioned above, here are some of the useful skills you may acquire upon enrolling in this course:

  • -Interpreting working drawings and sketches
  • -Selecting and cutting workshop materials
  • -Performing Shop computations (Basic)
  • -Measuring Workpiece ( Basic)
  • -Performing Shop Computations (Intermediate)
  • -Measuring workpiece using angular measuring instruments
  • -Performing preventive and corrective maintenance
  • -Performing Bench work (Basic)
  • -Performing Bench work (Complex)
  • -Turning Work Piece (Basic)
  • -Turning Work Piece (Intermediate)
  • -Milling work piece (Basic)
  • -Milling work piece (Intermediate)
  • -Grinding work piece (Basic)
  • -Grinding Work piece (Complex)


Course Duration
This short Course only takes up a minimum of 307 hours to completion.


Admission Requirements

Common requirements for TESDA course include:
-Copy of Birth Certificate authenticated by NSO
-Copy of High School or College Diploma
-Certified true copy of Transcript of Records or Form 137
-1x1 or 2x2 Pictures
-Certificate of Good Moral Character

Requirements may vary depending on the training center, we recommend  to visit this page for detailed instruction.

Careers

Those who are qualified graduates of Machining NC II may find employment as any of the following:
-Machinist
-Lathe Operator
-Milling Machine Operator
-Precision Grinding Machine Operator
-Bench worker/fitter

Competency Assessment and Certification
Students who enrolled in the this course may be required to undergo a Competency Assessment before graduation. This is applicable to any of the courses you would enroll at. A National Certificate (NC II) will be issued to those who will pass this assessment. For accurate and more detailed information about the Assessment and Certification, you may visit this page.

Source: Courses.com.ph

TESDA Automotive Body Painting/Finishing Course: Full Details


Some people love to craft things out of objects that seem trash already. Most of the products are functional as that of the new ones. If you, yourself, have the ability to craft things, restore damaged or undamaged body parts of a motorcycle and the like, then this course suits your talent. Not only will it enhance your craftsmanship, you may learn a thing or two about the interpretation of manuals as well as application of specifications.


TESDA offers you Automotive Body Painting/Finishing NC II. It is one of the newest short courses offered in the Philippines that trains you in repairing body or panel paint on land based vehicles such as automobiles, trucks, buses, big bikes and motorcycles. You may also learn how to revamp those vehicles by covering colorful paints; put on and take away masks, and implement maintenance.


Let your talent be of use as we recommend this short program to people like you. Visit your nearest TESDA institution and check this out, right away.


Below are some of the examples of skills that you may acquire once you enroll in this short program:
  • -Applying appropriate sealant/adhesive
  • -Moving and positioning vehicle
  • -Performing mensuration and calculation
  • -Reading, interpreting and applying specifications and manuals
  • -Using and applying lubricant/coolant
  • -Performing shop maintenance
  • -Preparing damaged and undamaged surface for painting
  • -Applying and removing masking
  • -Spraying solid color paints
  • -Repairing solid color paints
  • -Performing Polishing
  • -Performing solid/metallic color mixing
  • -Spraying metallic color paint
  • -Repairing metallic color paint


Course Duration

The hours allotted for Automotive Body Painting/Finishing NC II takes a minimum of 158 hours to accomplish.



Admission Requirements

Below are the common requirements for TESDA course:
-Copy of Birth Certificate authenticated by NSO
-Copy of High School or College Diploma
-Certified true copy of Transcript of Records or Form 137
-1x1 or 2x2 Pictures
-Certificate of Good Moral Character

Although, requirements may vary depending on the course or situation you are going to enroll at, we strongly advise that you proceed directly to the school or training center’s official representatives or other staffs who are in charge with the requirements for more precise and detailed information regarding the said matter.


Prerequisite

In other Technical Vocational Institutions, they require people to finish Automotive Body Painting/Finishing NC I first before being endorsed to take Automotive Body Painting/Finishing NC II.

Careers

Those who are qualified graduates of Automotive Body Painting/Finishing NC II may find employment as an automotive painter for two stage paint or as an automotive paint finisher for two stage paint.

Notion for Competency Assessment and Certification

Those who are enrolled in the Automotive Body Painting/Finishing NC II may be required to undergo a Competency Assessment before graduation. This is applicable to any of the courses you would enroll at. A National Certificate will be issued to those who will pass this assessment. For accurate and more detailed information about the Assessment and Certification, you may visit the this link. 

Source: courses

TESDA Tailoring: Schools, Assessment, Careers


Do you wish to become a fashion designer? Yes, you read it right. You may become a fashion designer once you accomplish this short course offered by TESDA so we are asking you, are you tired of fashion less clothes? Want to try adding details to your apparels but don’t know how to do it properly? Want to embed something onto your clothes for extra designs? Then check out the suitable course for your demands. Go and see Tailoring NC II at TESDA Philippines.

Tailoring NC II is a short course which trains you in cutting and sewing fabrics which will certainly turn into casual apparels. Not only you will learn how to sew, but you may also become knowledgeable when it comes to the maintenance of each machines, be creative when it comes to designing ordinary clothes, and what’s best is you become the designer of your own product. In addition to the skills mentioned above, you may check the rest as you go on.

Below are some of the examples of core competencies that you may acquire upon enrolling in this short course:

  • -Carrying out measurements and calculations
  • -Setting up and operate machines
  • -Performing basic sewing machine maintenance
  • -Drafting and cutting materials of casual apparel
  • -Sewing casual apparel
  • -Applying finishing touches on casual apparel


Course Duration

Tailoring NC II only takes a minimum of 265 hours to completion.

Admission Requirements

Common requirements for TESDA course include:
-Copy of Birth Certificate authenticated by NSO
-Copy of High School or College Diploma
-Certified true copy of Transcript of Records or Form 137
-1x1 or 2x2 Pictures
-Certificate of Good Moral Character

Although, requirements may vary depending on the course or situation you are going to enroll at, we strongly advise that you proceed directly to the school or training center’s official representatives or other staffs who are in charge with the requirements for more precise and detailed information regarding the said matter.

Careers

Those who are qualified graduates of Tailoring NC II may find employment as a tailor or garment sewer.

Competency Assessment and Certification


Individuals who enrolled in the Tailoring NC II may be required to undergo a Competency Assessment before graduation. This is applicable to any of the courses you would enroll at. A National Certificate (NC II) will be issued to those who will pass this assessment. For accurate and more detailed information about the Assessment and Certification, you may visit "How To Apply for Assessment and Certification" on this site.

Schools Who Offer Tailoring Course

Aparri Polytechnic Institute (formerly: Aparri School of Arts and Trades)
Tailoring NC II
Maura, Aparri, Cagayan
(078) 822-8270 / 888-2015 / 822-8306
________________________________________

Ayala Technical Vocational School
Tailoring NC II
Ayala, Zamboanga City
(062) 926-4883/ 992-4862
________________________________________

Baguio City School of Arts and Trades
Tailoring NC II
Upper Session Road, Baguio City
(074) 444-8459
________________________________________

Batac Junior College, Inc.
Tailoring NC II
San Marcelino St., Brgy. Valdez, Batac, Ilocos Norte
(077) 792-3140
________________________________________

Benguet Technical School
Tailoring NC II
Wangal, La Trinidad, Benguet
(074) 424-7060/ 422-6234
________________________________________

Bulusan National Vocational Technical School
Tailoring NC II
Bamban, Lower San Jose, Bulusan, Sorsogon
09306932323
________________________________________

Caraga State University - Cabadbaran Campus (formerly: Northern Mindanao State Institute of Science & Technology)
Tailoring NC II
T. Curato St., Brgy. 12, Cabadbaran City
(085) 343-1020
________________________________________

Catanduanes State University (formerly: Catanduanes State Colleges)
Tailoring NC II
Calatagan, Virac, Catanduanes
None
________________________________________

Central Bicol State University of Agriculture (CBSUA) (formerly: Camarines Sur State Agricultural College - Sipocot, C. Sur)
Tailoring NC II
Sipocot, Cam. Sur
(054) 4566108
________________________________________

Don Bosco Training Center of Naga, Inc.
Tailoring NC II
Km. 13, Carolina, Naga City
(054) 4728755
________________________________________

Don Honorio Ventura Technological State University (DHVTSU) (formerly: Don Honorio Ventura College of Arts and Trades)
Tailoring NC II
Poblacion, Bacolor, Pampanga
900-0046/2453/0691
________________________________________

Dumalag Vocational Technical School
Tailoring NC II
Poblacion, Dumalag, Capiz
(036)643-02-74/09125214148
________________________________________

Ilocos Sur Polytechnic State College - Santiago Campus
Tailoring NC II (Ladd.-BSIT)
Poblacion Norte, Santiago, Ilocos Sur
None
________________________________________

Ilocos Sur Polytechnic State College - Santiago Campus
Tailoring NC II (Ladd.-BSIE)
Poblacion Norte, Santiago, Ilocos Sur
None
________________________________________

Isabela School of Arts & Trades
Tailoring NC II
Calamagui 2nd, Ilagan, Isabela
622-2470/ 624-0933
________________________________________

Kabasalan Institute of Technology
Tailoring NC II
F. L. Peña, Kabasalan, Zamboanga Sibugay
(062) 328-2158
________________________________________

Kabasalan Institute of Technology
Tailoring NC II - Mobile Training Program
F. L. Peña, Kabasalan, Zamboanga Sibugay
(062) 328-2158
________________________________________

Laura Vicuña Women Dev. and Training Center
Tailoring NC II
Hacienda Malihao, Bgy. 20, Victorias City
0919-2110550
________________________________________

Lazi Technical Institute (LTI) (formerly: Lazi National Agricultural School)
Tailoring NC II
Tigbawan, Lazi, Siquijor
(035) 922-6071/ 09285210294/ 0917-7792429
________________________________________

Leon Ganzon Polytechnic College
Tailoring NC II
Brgy. Maya, Balasan, Iloilo
33970915/Fax 3971108/3971159
________________________________________

Lorraine Technical Institute of Angeles City, Inc.
Tailoring NC II
Henson-Guanzon Bldg., Miranda ext., Angeles City
(045)888-6814
________________________________________

Mariano Marcos State University - CIT
Tailoring (BSIT) NC II
P. Gomez St., Laoag City, Ilocos Norte
(077) 771-4241
________________________________________

Paniqui Fashion School, Inc.
Tailoring NC II
1206 MH Del Pilar St., Pobalcion Norte, Paniqui, Tarlac
931-0279/ 9209100793
________________________________________

PASIG LIVELIHOOD FOUNDATION, INC.
Tailoring NC II
Caruncho Avenue, San Nicolas Pasig City
Tel 641-6536 / 642-4223
________________________________________

Provincial Training Center - (Tubigon)
Tailoring NC II
Potohan, Tubigon, Bohol
(038) 508-8216
________________________________________

Provincial/City Manpower Development Center
Tailoring NC II
Gen. Mamarinta Lao, Maliwanag, Marawi City, Lanao del Sur
09192727050
________________________________________

Quirino State University - Maddela Campus (formerly: Maddela Institute of Technology)
Tailoring NC II
Dipintin, Maddela, Quirino
09182820291
________________________________________

Samson College of Science and Technology, Inc.
Tailoring NC II
587 EDSA, Cubao, Quezon City
FAX 723-1648/ 721-4129/ 414-6429/ 414-6430/ 414-6431
________________________________________

SAN JUAN MANPOWER AND LIVELIHOOD TRAINING CENTER
Tailoring NC II
N. Domingo St., San Juan, Metro Manila
Tel 744-6028 / TeleFax:744-6029
________________________________________

Sisters of Mary Technical Education Institute, Cebu, Inc.
Tailoring NC II
Tungkop, Minglanilla,Cebu
(032) 2728636/ 2734858

Sorsogon National Agricultural School (SNAS)
Tailoring NC II
Mayon, Castilla, Sorsogon
None
________________________________________

Southern Isabela College of Arts and Trades
Tailoring NC II
Calaoacan, Santiago City, Isabela
(078) 682-3924/ 305-2577/ 305-1735
________________________________________

St. Paul University Iloilo, Inc. (formerly: St. Paul College of Iloilo, Inc.)
Tailoring NC II
Gen. Luna St., Iloilo City
33-3381095/ 33-3381097/ 33-3365619
________________________________________

Tadian School of Arts and Trades
Tailoring NC II
Tadian, Mt. Province
None
________________________________________

University of San Jose-Recoletos Inc.
Tailoring NC II
St. Ezekiel Moreno Building, Basak, Pardo, Cebu City
(032) 354-8405/412-9511
________________________________________

Victory Business College, Inc.
Tailoring NC II
#2736 Malaspina St., Bacolod City
432-5515/ 435-5557/ 433-7495

TESDA Carpentry NC II: Learn the proper training and be a Professional Carpenter


This may be one of the most mainstream occupations, a person could have but this is also one of the noblest jobs one could ever get. They say it's easy to be a carpenter but it's actually not, and believe me or not, Carpentry is more than just constructing or building damaged or unfinished large structures. Interested to know what else is in it? Then come and check Carpentry NC II as a course offered by TESDA. You may find it fascinating once you learned the different competencies you may obtain if you enroll.

This course will instruct you in performing fabrication, installing and stripping formworks. Other than cutting, shaping and installing building materials, you may be able to learn other competencies such as the ones you may view below.

These are some of the example of skills that you may acquire upon enrolling in this course:
  • -Preparing construction materials and tools
  • -Observing procedures, specifications and manual of instruction
  • -Performing mensuration and calculations
  • -Maintaining tools and equipment
  • -Preparing / Stalking-out building lines
  • -Installing framing works

Course Duration

The time allotted for Carpentry NC II takes a minimum of 120 hours to accomplish

Admission Requirements

Common requirements for TESDA course include:
-Copy of Birth Certificate authenticated by NSO
-Copy of High School or College Diploma
-Certified true copy of Transcript of Records or Form 137
-1x1 or 2x2 Pictures
-Certification of Good Moral Character

Though, requirements may vary depending on the course or situation you are going to enroll at, we intensely advise that you proceed directly to the school or training center’s official representatives or other staffs who are in charge with the requirements for more precise and detailed information regarding the said matter.

Careers

Those who are qualified graduates of Carpentry NC II may find employment as a rough carpenter.  Carpenters are needed for the country’s booming construction business, and in industries such as renting and business activities, real estate, public administration and defense, compulsory social security, and in private households.

Competency Assessment and Certification

Students enrolled in the TESDA Carpentry NC II course may be required to undergo a competency assessment before graduation. You can take this at any TESDA Accredited Centers for Carpentry Course. A National Certificate (NC II) will be issued to students who passed this assessment process.

Got Questions?

You will find our answers on common questions about schools, tuition fee, enrollment, assessment and more in this TESDA COURSE FAQs.

If you have a question that was not covered  there, please leave it on the comment section below and we’ll try to answer you as soon as we can.

TESDA Short Course: Electrical Installing and Maintenance NC II in the Philippines


We believe we have reached the Millenium of Advanced Technology wherein most of the objects or appliances we use at home require electricity. An example of this is the Electric Stove. Who could imagine that it can be invented? In line with this, the capability of installing electrical wirings and the like is such a useful skill. Take note that there are only limited number of people who knows how to operate wires and cables and most of them are either Engineers or Electricians and they got their title by learning every component for about 4 to 5 years in college.

Don't have the time to learn that long? Then go and see Electrical Installation and Maintenance NC II in TESDA. It is a short course which trains you in installing and maintaining electrical wirings, lightings, and other related systems and equipment in community buildings where the only limits does not exceed beyond 600 volts. 


Some examples of skills that you will acquire from enrolling in this program include:
  • -Prepare construction materials and tools
  • -Observe procedures, specifications and manuals of instruction
  • -Interpret technical drawings and plans
  • -Perform mensurations and calculations
  • -Maintain tools and equipment
  • -Prepare electrical power and hydraulic tools
  • -Perform roughing-in activities for communication and distribution systems
  • -Install writing devices for floor and ground fault current interrupting outlets
  • -Install electrical protection system for lighting and grounding
  • -Install electrical lighting systems on auxiliary outlets and lighting fixtures


Course Duration

The time allotted for Electrical Installation and Maintenance NC II takes a minimum of 402 hours to complete.

Admission Requirements

Basic requirements for this TESDA course include:
  • -Copy of NSO Birth Certificate
  • -High school or College diploma
  • -Certified true copy of Transcript of Records or Form 137
  • -Certification of Good Moral Character
  • -1x1 and/or 2x2 Pictures


Careers

The qualified graduates of Electrical Installation and Maintenance NC II may find employment as any of the following:
-Building-Wiring Electrician
-Residential/Commercial-Wiring Electrician
-Maintenance Electrician

Competency Assessment and Certification

Students enrolled in the Electrical Installation and Maintenance NC II course may be required to undergo a competency assessment before graduation. You can take this at any TESDA Accredited Centers for Electrical Installation and Maintenance Course. A National Certificate (NC II) will be issued to students who passed this assessment process.

Got Questions?

You will find our answers on common questions about schools, tuition fee, enrollment, assessment and more in this TESDA COURSE FAQs.

If you have a question that was not covered  there, please leave it on the comment section below and we’ll try to answer you as soon as we can.

TESDA Bookkeeping NC III: Course in demand!


Can secretarial skills and auditing skills be combined and make a living out of it? Ever wonder if there's a job suited for those who want to practice their negotiation skill despite not having the capacity to go to college? Worry no more as we have the answer to your questions!

A new and fresh course offered by TESDA is now available! Check out Bookkeeping NC III and explore a variety of competency skills you may absorb. This course shall instruct you regarding the posting of transactions, preparation of trial balance, preparation of financial reports and review of the internal control system.


Other competencies aside from those that are mentioned above, it will also train you how to:

  • -Lead workplace communication
  • -Lead Small team
  • -Develop and practice negotiation skills
  • -Solve problems related to work activities
  • -Use mathematical concepts and techniques
  • -Use relevant technologies
  • -Apply quality standards
  • -Perform computer operations
  • -Maintain an effective relationship with clients and customers
  • -Manage own performance

Course Duration

The hours allotted for this course takes a minimum of 292 hours to complete.


Admission Requirements

Common requirements for TESDA course include:
-Copy of Birth Certificate authenticated by NSO
-Copy of High School or College Diploma
-Form 137 or Certified true copy of Transcript of Records
-1x1 or 2x2 Pictures
-Certificate of Good Moral Character

Though, requirements may vary depending on the course or situation you are going to enroll at, we intensely advise that you proceed directly to the school or training center’s official representatives or other staffs who are in charge with the requirements for more precise and detailed information regarding the said matter.

Bookkeeper Jobs

Those who are qualified graduates of TESDA Bookkeeping may find employment as either a bookkeeper or as an accounting clerk. A bookkeeper can also apply for part time jobs online, there are tons of people or company who needs the knowledge of a bookkeeper that can manage and create a report for them.


Competency Assessment and Certification

Individuals who are enrolled in the Bookkeeping NC III may be required to undergo a Competency Assessment before graduation. This is applicable to any of the courses you would enroll at. A National Certificate (NC II) will be issued to those who will pass this assessment. Click here for detailed information about the Assessment and Certification.